Industrial Training - The Best for Less

Industrial Automation Training

The Automation Specialist Training Software Bundle.

 

This bundle of courses includes the following 7-course software titles. Of specific interest to Industrial Automation Technicians, industrial automation specialists, and others. This bundle includes PLC training, PAC training, HMI training, VFD, motor and controls training, troubleshooting training, and DeviceNet. (Links to each course's description page are below.)

 

If you are looking for Rockwell Automation training, you have come to the right place. All these industrial automation training courses are based on that brand. The courses deliver the foundational knowledge of each device, system, or software, so it is a great place to start regardless of brand. As you will see, working with industrial automation requires not only PLC and Programmable Automation Controller (PACs) knowledge but also an understanding of other devices and software the PLC/PAC interacts with, like motor controls, HMI, VFDs, and industrial networking.

 

 

Maintenance Technician Training

 

Seven Highly Interactive Industrial Automation Training Courses

 

Save 32%! by bundling

 

Industrial Automation Specialist Training - The Automation Specialist Bundle (140 hours total)

Prod #: KT-100B-AutoSpec-Bundle

 

Automation Training Courses:

 

  • Motor Controls Certificate Course
  • VFD Training Certificate Course
  • PLC Training Certificate Course
  • Electrical Troubleshooting Certificate Course
  • RSLogix 5000 Training Certificate Course
  • HMI Training Certificate Course
  • DeviceNet Training Certificate Course
  • Every course has many interactive screens.
  • Each course has a final exam.
  • Each course has a printable laboratory manual.
  • Each course prints a certificate of completion.

 

Tap each certificate course software title below to see details, screenshots, and videos of the course software being used.

 

Included Automation Training Courses:

The automation training courses listed below are in the recommended course completion order. Starting with the motor controls VFD, then on to the PLC/PAC courses, and wrapping it up with the HMI and industrial networking courses.

 

 

motor controls training

Includes AC Motor Speed Control and Troubleshooting.

Motor Controls Training Course

 

This Motor Controls Training Course is quite detailed. This course begins by discussing the differences between wiring diagrams and ladder diagrams. Then it delves into motor control theory, covering the entire AC motor control system. Additionally, the course covers solenoids, timers, sensors, relays, and troubleshooting. The study concludes by introducing the learners to PLCs. The PLC section prepares the student for the other courses in this bundle. - 25hrs

VFD training

VFD Wiring Diagrams to Troubleshooting Covered.

VFD Training Course

 

This VFD Training Course starts with the fundamental operation of Variable Frequency Drives (VFD). Installation, programming, and troubleshooting are then covered. There are also sections on AC motors, start-ups, and soft starters. All in a proven structured curriculum to ensure the best understanding and retention. - 15hrs

Rockwell Automation PLC training course LogixPro PLC simulator

Rockwell PLC Training Course + LogixPro PLC Simulator

PLC Training Course

 

The PLC Training Course and LogixPro simulator have the look and feel of Rockwell Automation software. This course covers PLC basics, data manipulation, and shift registers. There are interactive simulations for most topics. Even the Sequencers and analog sections have simulators. As with all the courses here, it ends with a section on troubleshooting. This course includes a licensed copy of the LogixPro PLC Simulator Software as a gift from us! - 30hrs

plc troubleshooting training

1 of 8 Electrical Troubleshooting Simulations

Troubleshooting Training Course

 

This PLC& Electrical Troubleshooting Training Course uses real-world electrical simulations. The technician first learns proper electrical troubleshooting techniques. Next, they practice with a virtual volt-ohmmeter (VOM) in voltage measurement mode. The rest of the course tests the learner's electrical and PLC troubleshooting skills. The circuits increase in complexity. First electrical, then motor controls, and then PLC faults. If the test results in a score lower than 85%, an option to reset all troubleshooting faults pops up. - 10hrs

rockwell automation rslogix 5000 training

1 of 63 Rockwell Automation's RSLogix 5000 Simulations

RSLogix 5000 Training Course

 

This RSLogix 5000 Training Course introduces the PAC hardware and software. Allen Bradley PAC hardware is the ControlLogix. The associated software is the Rockwell RSLogix 5000. Learn the fundamentals of Rockwell Automation's RSLogix 5000 PAC programming software. Become more familiar with the Programmable Automation Controller (PAC) called the Controllogix. - 30hrs

rockwell automation hmi training

HMI Training Simulating Rockwell Automation's RSView.

HMI Training Course

 

This HMI Training Course software uses Rockwell's RSView32 platform as an example. The course includes details about RSLinx communications, DDE Excel, RSView graphics, and more. We chose the original RSView32 version instead of FactoryTalk to teach HMI. This original version makes it easier for the beginner to learn the fundamentals of HMI. This is also an excellent course for instrumentation technicians. IT engineers new to industrial HMI will find it a great introduction. - 20hrs

industrial networking training

A Student Using Course Interactive to Build a DeviceNet Network.

DeviceNet Training Course

 

This DeviceNet Training Course introduces the learner to industrial networking using DeviceNet. This protocol also conforms to the ODVA standards which attribute to its popularity. DeviceNet is still used in many manufacturing facilities worldwide. It can be simpler to learn the basics with than EtherNet/IP. It has many interactions and ends with a Troubleshooting Tips and tricks section. - 20hrs

 

No need to search for Rockwell Automation training schedule 2023, take these Rockwell automation courses on your own schedule!

 

Testimonial:

Chuck Pheiffer - Maintenance Mechanic

"Many of the guys that I work with have been using and talking about your PLCTrainer bundle. I finally ordered a copy and want to let you know that this is exactly what I have been needing. My understanding of the instruction set for our 5/04 processors is so much better now. Now when I am troubleshooting a process, I can look at the logic in monitor mode and actually understand what is supposed to happen. This made my job sooooo much easier."

 

Foundational automation training for understanding and working with industrial automation systems.

 

 

Within 24 hours of the order being placed, you will receive an email with a download link and activation information or tracking information if the USB format was ordered.

 

License Type/Format

 

 

Order a Single Student Licensed above. Or order unlimited students/installs per physical site with the Site License.

 

For unlimited physical site licenses (locations), please Request a Quote for the Enterprise License.

 

 

Features of the Industrial Automation Training Courses in this bundle:

 

 

 

Each course has a built-in glossary of terms either integral or as a printable PDF. Below is a screenshot of the RSLogix 5000 glossary of terms as one example.

 

rslogix 5000 glossary

 

 

 

 

Each course features audio narration, text transcripts, and bookmarking. Each course has an interactive "self-scoring" final exam. The student will see the option to print a certificate of completion upon scoring 85% or better. Below are examples.

 

rslogix 5000 test

rslogix 5000 certificate

 

 

School and Company Multiple User Licenses:

 

 

 

A mini-LMS built into the Site and Enterprise licensed versions of this course software.

 

With the site licenses, even if the certificate is not printed on test completion, the score and student name are still saved in the "student log file", accessible by Site and Enterprise license holders. Additionally, when the quiz is scored, the student's name and final score are appended to a comma-delimited text file that may be imported into a database or spreadsheet application.... making the site license purchasing option perfect for Technical Schools, Community Colleges, Universities, Apprenticeship Programs, and company training departments.

 

rslogix 5000 course site license

rslogix 5000 course student log

 

 

RSLogix 5000 PDF

Each course includes its own printable PDF Laboratory Manual. The manual consists of optional questions and exercises for each course section. Some activities need the instructor to make software and hardware available. Lab manual content is optional for students/employees to take and pass this course. Site Licenses include an answer key for lab manual questions and exercises.

 

Courses start from beginner level. They use interactive simulations to make learning easier. So, even students without previous experience in the field can use these courses. But they need to follow the recommended learning path. The learning path is the course order listed above.

 

The Lab Manuals range from 30-179 pages and are a great instructor aid.

 

 

 

 

 

Within 24 hours of the order being placed, you will receive an email with a download link and activation information or tracking information if the USB format was ordered.

 

License Type/Format

 

 

Order a Single Student Licensed above. Or order unlimited students/installs per physical site with the Site License.

 

For unlimited physical site licenses (locations), please Request a Quote for the Enterprise License.

 

 

 


 

 

More bundles: The PLC Technician -The Automation Specialist - The Maintenance Technician - The ITI & Technician's Dream

 

 

All trademarks and trade names are property of their respective owners. We are in no way affiliated with Allen Bradley ®/Rockwell Automation ®.