Training Equipment: PLC Training Kit
Featured: Micro800 PLC Training Kit
Please click above PLC Training Kit picture to see close up.
Micro 800 PLC Training Kit
Description: Micro 800 PLC Training Kit that uses the Micro820 PLC and Allen Bradley's free Connected Components Workbench (CCW) Software to connect with it. These particular PLC trainers are great to learn on and practice your PLC programming with.
This PLC Training kit is the new standard educational equipment for manufacturing training and for the individual.
Everything you need is in this PLC Training Kit, so the PLC Trainer can be used for self PLC programming training too. Same discounted price for individuals that we sell the PLC Training Kit to Schools, Corporations, and Government for. We sell this at cost and do not make a profit from the sale of this equipment. We offer this just to support our existing customers and others who may have need.
Note: It is recommended you take the PLC Programming Basics Course before using PLC training equipment.
2080-LC20-20QWB Controller, 12 24V DC Inputs, 4 configurable analog input with thermistor voltage reference out, 7 Relay Output, 1 Analog Output, Embedded Ethernet Port and RS-232/485 non-isolated Serial port, Embedded RTC, MicroSD Card support, 2 Plug-In slots, also has PID Loop control capabilities.
1 Allen Bradley Micro820 PLC 2080-LC20-20QWB Ethernet I/P Controller
1 Training Module
4 discrete inputs pre-wired (8 spares)
4 discrete outputs pre-wired (3 spares)
1 analog input pre-wired (3 spares)
1 analog output pre-wired
1 Power switch
1 Programming Cable
1 Ethernet cable
1 Power Supply
Allen Bradley provides PLC Training videos, manual and sample programs for this Micro 800 series controller.
We also recommend that you use an Ethernet switch or router
Note: The Micro 800 series controllers are almost Nano PACs (Process Automation Controllers), supporting 3 of the 5 IEC 61131-3 programming Languages. Ladder Diagram, Function Block, and Structured Text. As it does support ladder logic, it can be used to learn PLC basics. It is referred to it as a PLC Training Kit because technically it is not a PAC that multitask. The CCW PLC programming environment is similar to the PAC programming environment as it uses Tag and has Structured Text capabilities. Use the toolbox to drag rung, contacts, etc, the variable selector box (tag table) to assign memory addresses, etc. Within the CCW programming software, AB provides many free training videos too as well as the PLC manual.
So while we highly recommend you take our PLC Programming Basics Course before starting hands-on with the Micro 800 PLC training kit, you would be even better prepared by also taking our PAC introduction course before starting hands-on with this. Allen Bradley's free Connected Components Workbench Software (CCW) you use to program this PLC, also has an HMI programming component, so you could also benefit even more by taking our introductory course to HMI programming. We only bring this up because we currently have all the PLC training courses mentioned above, bundle together so you can save 30%+ just by thinking ahead. (See PLC Technician training bundle)
Michael Heiser -Industrial Electrician at Schreiber Foods: " Don, I thought I would message you and let you know that I enjoyed using your products. I set up a BIN Allen-Bradley trainer, and a Siemens trainer for one of my instructors during my apprenticeship. They are very easy to set up and operate, and good quality. My instructor was happy with them as well. Thought you would like to know! "
Shipping cost included in the price below. Prices are total cost delivered
Within 24 hours an email with shipping info will be sent. You must include the shipping address when ordering, or email it to us to avoid delays. All orders shipped USPS Priority or Express mail, no PO boxes allowed as the PLC equipment can be larger than mailbox. 4.00 LBS
Shipping within the USA Only ---- Price: USD$439.00
Shipping to all other countries ---- Price: USD$489.00
Note: The international importer is responsible for all customs duties (taxes).
Automated download system is powered by our preferred method of payment, secure PayPal. (After purchase with the 'Add to Cart' button above, you immediately receive a confirmation email.)If you prefer us to manually process your order or would like to mail order in, please click Training Material Order Form on our secure servers.
(Click on Credit card picture above for manual order processing. Your shipping info will be emailed within 24 hours with manual processing.)
The preferred level of hands-on PLC training is by companies ordering our Onsite PLC training and individuals attending our PLC training seminar. But if your schedule or budget will not allow those instructor based PLC training solutions, this PLC training kit will give you some hands-on experience.
"Basic PLC Training Course" (This course recommended before you use above trainer.)
PLC Training Video Series (10 DVD Set w/ workbook)
"Troubleshooting PLC Control Circuits" training software.
"Siemens PLC Simulator Bundle" training tool.