Industrial Maintenance Technician Training
The Maintenance Technician Training Software Bundle.
This maintenance technician bundle is the same as the Automation Maintenance Technicians' Dream Bundle, except we swapped out the electrical drawing/simulation software in that dream bundle with the hydraulics course to create this Industrial Maintenance Technician Training Bundle at a 31% discount. This bundle is preferred by individuals purchasing and for schools and companies when they seek an independent study solution for students and employees.
Maintenance Technician's Bundle:
This bundle includes the following 8-course software titles of specific interest to industrial maintenance technicians. This bundle contains PLC training, PAC training, HMI training, VFD, motor and controls training, troubleshooting trainer, DeviceNet tutor, and the fluid power trainer. You can click on each certificate course software title below to see details, screenshots, and videos of the student using some of the chosen course's interactive simulations.
Eight Highly Interactive Maintenance Technician training courses
Save 31%! by bundling
Maintenance Technician Training - The Maintenance Technician's Bundle (175 hours total)
Prod #: KT-800B-MaintTech-Bundle
Maintenance Technician Training Courses:
- Hydraulics Certificate Course
- Motor Controls Certificate Course
- VFD Training Certificate Course
- Electrical Troubleshooting Certificate Course
- PLC Training Certificate Course
- RSLogix 5000 Training Certificate Course
- HMI Training Certificate Course
- DeviceNet Training Certificate Course
- Every course has many interactive screens.
- Each course has a final exam.
- Each course has a printable laboratory manual.
- Each course prints a certificate of completion.
Tap each certificate course software title below to see details, screenshots, and videos of the course software in use.
Included Maintenance Technician Courses:
The maintenance technician courses listed below are in the recommended course completion order. Starting with mechanical maintenance, the Hydraulics Training course, and then on to the electrical maintenance technician courses, Motor Controls, and Industrial Networking courses.
This course includes hydraulic systems, pneumatic systems, and vacuum systems.
Hydraulics Training Course
The Hydraulics Training Course covers the fundamentals of hydraulic engineering systems and pneumatics training, using animation and interactivity to make it enjoyable. So, this hydraulics course is excellent for schools, maintenance, mechanics, and engineers as a refresher. A great course for anyone who wants to know the fundamentals of fluid power systems. - 25hrs
Includes AC Motor Speed Control and Troubleshooting.
Motor Controls Training Course
This Motor Controls Training Course is quite detailed. This course begins by discussing the differences between wiring diagrams and ladder diagrams. Then, it delves into motor control theory, covering the entire AC motor control system. Additionally, the course covers solenoids, timers, sensors, relays, and troubleshooting. The study concludes by introducing the learners to PLCs. The PLC section prepares the student for the other courses in this bundle. - 25hrs
VFD Wiring Diagrams to Troubleshooting Covered.
VFD Training Course
This VFD Training Course starts with the fundamental operation of Variable Frequency Drives (VFD). Installation, programming, and troubleshooting are then covered. There are also sections on AC motors, start-ups, and soft starters. All in a proven structured curriculum to ensure the best understanding and retention. - 15hrs
Rockwell PLC Training Course + LogixPro PLC Simulator
PLC Training Course
The PLC Training Course and LogixPro simulator have the look and feel of Rockwell Automation software. This course covers PLC basics, data manipulation, and shift registers. There are interactive simulations for most topics. Even the Sequencers and analog sections have simulators. As with all the courses here, it ends with a section on troubleshooting. This course includes a licensed copy of the LogixPro PLC Simulator Software as a gift from us! - 30hrs
1 of 8 Electrical Troubleshooting Simulations
Troubleshooting Training Course
This PLC& Electrical Troubleshooting Training Course uses real-world electrical simulations. The technician first learns proper electrical troubleshooting techniques. Next, they practice with a virtual volt-ohmmeter (VOM) in voltage measurement mode. The rest of the course tests the learner's electrical and PLC troubleshooting skills. The circuits increase in complexity. First, electrical, then motor controls, and then PLC faults. If the test results in a score lower than 85%, an option to reset all troubleshooting faults pops up. - 10hrs
1 of 63 Rockwell Automation's RSLogix 5000 Simulations
RSLogix 5000 Training Course
This RSLogix 5000 Training Course introduces the PAC hardware and software. Allen Bradley PAC hardware is the ControlLogix. The associated software is the Rockwell RSLogix 5000. Learn the fundamentals of Rockwell Automation's RSLogix 5000 PAC programming software. Become more familiar with the Programmable Automation Controller (PAC) called the Controllogix. - 30hrs
HMI Training Simulating Rockwell Automation's RSView.
HMI Training Course
This HMI Training Course software uses Rockwell's RSView32 platform as an example. The course includes details about RSLinx communications, DDE Excel, RSView graphics, and more. We chose the original RSView32 version instead of FactoryTalk to teach HMI. This original version makes it easier for the beginner to learn the fundamentals of HMI. This course is also an excellent course for instrumentation technicians. IT engineers new to industrial HMI will find it a great introduction. - 20hrs
A Student Using Course Interactive to Build a DeviceNet Network.
DeviceNet Training Course
This DeviceNet Training Course introduces the learner to industrial networking using DeviceNet. This protocol also conforms to the ODVA standards, contributing to its popularity. DeviceNet is used in many manufacturing facilities worldwide and can be simpler to learn the basics with than EtherNet/IP. It has many interactions and ends with a Troubleshooting Tips and tricks section. - 20hrs
Great for those wanting to master maintenance technician interview questions!
Testimonial:
Liban - Maintenance Technician - Siemens
"I would like to thank you all for providing me with support for the Maintenance Bundle program. I have learned so much from your programs, Because of your Software I am happy to let you guys know that I have obtained my long time Dream Goal of working for Siemens [Healthcare], I will be starting work on July I CAN NOT under state how much your software has helped me learn and pass the interview question. I am for ever great full to BIN95 / KOLD WATER staff."
Great for the facility maintenance technician wanting to expand their capabilities and opportunities!
Within 24 hours of placing the order, you will receive an email with a download link, activation information, or tracking information if the order is shipped.
Order a Single Student Licensed above. Or order unlimited students/installs per physical site with the Site License.
For unlimited physical site licenses (locations), please Request a Quote for the Enterprise License.
Features of Electrical & Automation Courses in this bundle:
Each course has a built-in glossary of terms, either integral or as a printable PDF. Below is a screenshot of the RSLogix 5000 glossary of terms as one example.
Each course features audio narration, text transcripts, and bookmarking. Each course has an interactive "self-scoring" final exam. The student will see the option to print a certificate of completion upon scoring 85% or better. Below are examples.
School and Company Multiple User Licenses:
Built into the Site and Enterprise-licensed versions of this course software is a mini-LMS.
Site and Enterprise license holders can access the student log file. It saves the student's name and score after scoring the quiz. You can import that file to a database, spreadsheet, or other application. Our Site License option is excellent for technical schools and company training departments. That option is a perfect solution for unlimited users at a reasonable price. Community Colleges, Universities, and Apprenticeship Programs also use our Site licenses.
Each course includes its own printable PDF Laboratory Manual. The manual consists of optional questions and exercises for each course section. Some activities need the instructor to make software and hardware available. Lab manual content is optional for students/employees to take and pass this course. Site Licenses include an answer key for lab manual questions and exercises.
Courses start from the beginner level. They use interactive simulations to make learning easier. So, even students without previous experience in the field can use these courses. But they need to follow the recommended learning path. The learning path is the course order listed above.
The Lab Manuals are 30-179 pages and an excellent instructor aid.
Within 24 hours of placing the order, you will receive an email with a download link, activation information, or tracking information if the order is shipped.
Order a Single Student Licensed above. Or order unlimited students/installs per physical site with the Site License.
For unlimited physical site licenses (locations), please Request a Quote for the Enterprise License.
More bundles: The PLC Technician - The Automation Specialist - The Maintenance Technician - The Automation Technician's Dream
All trademarks and trade names are the property of their respective owners. We are an independent training provider and not affiliated with Allen Bradley.