- All Articles
Denver Tech Center Colorado
PLC Logic Controller Training Workshop
PLC control logic training in beautiful DTC Denver, CO.
Schedule: Aug 19-21, 2018 (No more open seats for Denver, see Las Vegas! )
This PLC Logic Controller training also scheduled for Las Vegas, NV.
and offered as On-Site PLC Training
|What you will learn ... |
Basic use RSLogix � Software
PLC Ladder Logic
Standard Operating Practices (SOP)
Troubleshoot Actual Problems
Setup PLC Hardware and New Program
What you will receive ...
We are a Strategic Training Partner for the Association for Facilities Engineering (AFE) and provide AFE members a 10% discount.
Side Notes: The Challenge Workshop is a full days of hands on challenges, assigned by one of the instructors. The instructors will walk you through setting up a PLC from scratch and writing a brand new program. Then you will troubleshoot your own program and add on to it as time permits.
Next DTC Denver, CO Class:
Aug 19-21, 2018
Note: Seminar Ends 4:30 Thursday, please book travel accordingly. (Friday Travel recommended.)
Can't make one of our seminars?
See our alternate training solutions below ...
PLC Training Video Series (10 DVD Set w/ workbook)
Also see ...
Troubleshooting PLC Control Circuits training software.
Business Industrial Network will be hosting this best in class PLC Logic Controller Training at the world class Denver Tech Center Colorado (DTC Denver, CO.) Gain job security and improve your company with our Safety and Reliability focused PLC control logic training in beautiful DTC Denver, CO.
Companies: Bring your electricians up to PLC Tech level or use our PLC Logic Controller training to cross-train engineers, general maintenance, mechanics and IT personnel, in just 3 days. Even maintenance managers attend our seminars to to capitalize on our valuable insight to managing PLCs in their organization and to get more familiar with PLCs. How can Business Industrial Network successfully do this in such a short time? Three key elements of our PLC training program make this possible.
1. We do not waste valuable training time and your money, teaching you and employees history, math, instructions, etc., that will never be used on the job in the real world. (But we do provide information CDs for them to learn that extra material on their own at a later time.) This greatly simplifies learning to work with PLCs.
2. The all 24 hours of training (3 Days) is hands on with actual PLC Logic Controller (SLC 500, PLC 5 and MicroLogix available) and RSLogix Software assigned to each attendee. Everything learned, is learned by doing on actual equipment, not simulations.
3. The instructors insure each attendee is performing each task with the PLC Logic Controller in the Safe, Reliable and Efficient method taught. The instructor evaluates attendees as they perform task and deliver a written quiz, insuring each earns the Certificate and 1.6 CEU.
Individuals: With the economy the way it is now days, it's more important than ever that you have the required job skills needed to open more doors for you, and secure your present jobs. Even 20 year veterans to the electrical and maintenance field, as well as those who have had previous PLC Logic Controller training, comment they walked away from our training with valuable time and money saving tips, that they did not pick up on their own or from other PLC Logic Controller training providers.
With the baby boomers retiring, the demand for qualified PLC Control Logic Techs is only going to grow. Maintenance Managers look for PLC Logic Controller experience like we deliver, in their new hires. So our PLC Logic Controller training will give the individual the cutting edge in the job market. Additionally, with the relatively new PLC Logic Controllers being Ethernet capable, IT personnel needing to learn about PLC Logic Controllers. Before the IT person seeks knowledge about PLC Control Logix, they need a good foundation in RSLogix.
More importantly, they need the safety and reliability only our instructor led training can provide. So our PLC Training will open doors for IT personnel as well as maintenance, engineering, electrical contractors and electricians. Even maintenance managers new to the job, or looking to reduce down time and operating cost, will find our unique PLC Logic Controller training valuable.
This three day workshop is based on the same onsite customized PLC 5 � and SLC 500 � PLC training course used to reduce downtime in FDA regulated manufactures, Government Facilities and Fortune 500 companies through out the United States. This PLC Logic Controller course is not just text book PLC instructions, but practical knowledge and case examples based on years of experience.
This PLC course will offer information your people will actually use out on the shop floor. A crash course in how to reduce downtime while working with Allen-Bradley's RsLogix � PLC 5 � and SLC 500 � software. The 3rd day of this seminar is commissioning a PLC from scratch and writing a new program.
To offer you the greatest return on your PLC Logic Controller training investment this seminar is focused on ...
The instructor for this seminar will be Jim Joros, local Denver resident who delivers our on-site PLC training through out the USA. Instructors will roam the class helping all attendees with the course outline and hands on application.
Next Denver Tech Centre Training Date: Aug 19-21, 2018 Price: $1450
(No more open seats for Denver, see Las Vegas!)
Customer Comments ...
"Our skill levels ranged from expert to beginner and no one was left behind. Tell Don I said hello when you speak with him. This guy is good."
Ross Thomas, Jr
K33 Decon/Final Survey Building Ops Manager
"This training is not like the vendor training we have received before where they try to sell you their hardware. We where getting hands-on training after the first hour and advice that only an experienced end-user would offer. A great supplement to our tech school training. Thanks"
"Excellent facilities. Clean! Awesome experience. Will recommend to fellow employees."
Kern River Gas Transmission Co.
"The instructor demonstrated thorough knowledge of the training materials and also provided useful real life examples."
seminar location ...
DTC Denver, CO Building
4600 S. Syracuse Street, 9th Floor, Denver, Colorado 80237
Click picture for location details >>
This PLC Logic Controller seminar/workshop will be held in the state of the art training facility located on the 9th floor of the Denver - DTC. (HQ)
Hotels closest is the hilton garden inn denver tech center
click above to see hotel website.
For more PLC Seminar details and to register click register button above.
Register TODAY because seating is limited!
All trademarks and trade names are property of their respective owners. We are in no way affiliated with Allen Bradley and do not promote any vendors during our training seminars. (Coloradoans refer to the corporate complex on I-25 named Denver Tech Center Colorado, as "DTC" Denver CO.)