GE Fanuc Series 90-30 Communications and Specialty Modules Configuration
Communication and Specialty Modules – These type modules give versatility to the 90-30 PLC system, allowing it to go beyond generic functionality. Communication Modules allow the system to control advanced functions, such as networking, temperature control, high speed counting, motion control, and even interfacing with machine operators. Other Specialty Modules include Programmable Coprocessor, allowing interfacing with bar code readers, RTUs and other ASCII devices through MegaBasic or “C” programming; Servo Motion Control Modules come in the DSM Module that is 2 axis high performance digital including servos and amplifiers, and the APM Module available in one or two axis analog. Still others Modules available include Multi-Axis Stepper; Absolute Resolvers/Encoders; Thermocouple; RTD; Millivolt/Strain Gauge; Sequence of Event Recorder; and Modem Modules. The following table represents a sampling of the 100s of Communication and Specialty Modules available.
PART NUMBER | DESCRIPTION |
IC693CMM301 | GENIUS COMMUNICATIONS MODULE, GCM – 256 BITS |
IC693CMM302 | GENIUS COMMUNICATIONS MODULE, GCM+ - 1 KILOBYTE |
IC693CMM311 | COMMUNICATIONS MODULE, CCM, RTU, SNP, SNPX |
IC693CMM321 | ETHERNET INTERFACE MODULE |
HE693RTUXXX | VARIOUS RTU/MODBUS MODULES (HORNER ELECTRIC) |
IC693ACC300 | INPUT SIMULATOR MODULE |
IC693APU300 | HIGH SPEED COUNTER |
IC693APU301 | AXIS POSITIONING MODULE, 1 AXIS, ANALOG |
IC693APU302 | AXIS POSITIONING MODULE, 2 AXIS, ANALOG |
IC693DSM302 | DIGITAL SERVO MODULE, 2 AXIS |
HE693STPXXX | VARIOUS STEPPED POSITIONING MODULES (HORNER ELECTRIC) |
IC693APU305 | I/O PROCESSOR MODULE – READS PARALLEL GRAY CODE ENCODER |
IC693PCM300 | PROGRAMMABLE COPROCESSOR MODULE, 160KB, 35KB BASIC PROGRAM, 2 PORTS |
IC693PCM301 | PROGRAMMABLE COPROCESSOR MODULE, 192KB, 47KB BASIC PROGRAM, 2 PORTS |
IC693PCM311 | PROGRAMMABLE COPROCESSOR MODULE, 640KB, 190KB BASIC PROGRAM, 2 PORTS |
HE693PCCXXX | VARIOUS PC COPROCESSORS (HORNER ELECTRIC) |
IC693TCM302 | TEMPERATURE CONTROL MODULE, AUTO TUNING, 8 THERMOCOUPLE IN, 8 24 VDC OUT |
CS693ATM300 | PID AUTO TUNING MODULE (CONTROLS0FT) |
DL693MDMXXX | VARIOUS MODEM MODULES (DATALINC) |
IC693BEM331 | GENIUS BUS CONTROLLER MODULE |
IC693BEM340 | WORLDFIP BUS MODULE, MASTER |
IC693BEM330 | WORLDFIP BUS MODULE, SLAVE |
HE693DNT250 | DEVICENET INTERFACE MODULE, MASTER (HORNER ELECTRIC) |
HE693IBS100 | INTERBUS-S INTERFACE MODULE, SLAVE ONLY (HORNER ELECTRIC) |
HE693BEM310 | SDS INTERFACE MODULE, MASTER (HORNER ELECTRIC) |
HE693PBM100 | PROFIBUS-DP INTERFACE MODULE, MASTER (HORNER ELECTRIC) |
HE693PBS105 | PROFIBUS-DP INTERFACE MODULE, SLAVE (HORNER ELECTRIC) |
PE693BEM350 | I/OPEN LONWORKS BUS INTERFACE MODULE, MASTER, FTT-10 (PENSAR CORP) |
PE693BEM351 | I/OPEN LONWORKS BUS INTERFACE MODULE, MASTER, TPXF-78 (PENSAR CORP) |
PE693BEM352 | I/OPEN BUS INTERFACE MODULE, MASTER, TPXF-1250 (PENSAR CORP) |
TM693SWP151 | SEQUENCE OF EVENTS SOFTWARE, 256 INPUTS, 1MS RESOLUTION (TRIMATION) |
TM693SWP152 | SEQUENCE OF EVENTS SOFTWARE, 256 INPUTS, 10MS RESOLUTION (TRIMATION) |
TM693SWP202 | HOT STANDBY USING GENIUS BUS, 480 INPUTS, 512 OUTPUTS, 7,999 SYNCHRONIZED VARIABLES, REQUIRES CPU 340 (TRIMATION) |
TM693SWP203 | HOT STANDBY USING GENIUS BUS, 2048 I/O, 8,000 SYNCHRONIZED VARIABLES, REQUIRES CPU 351 OR CPU 352 (TRIMATION) |
Be sure to see the Technician's Dream Bundle
Click for PLC Programming Training
- Series 90-30 CPU Racks
- Series 90-30 Power Supplies
- Series 90-30 CPUs
- Series 90-30 Digital Input/Output Modules
- Series 90-30 Communications and Specialty Modules