PLC SCADA Training Online Test
SCADA test part of PLC SCADA Training using Siemens automation WinCC
SCADA Online Test
8 SCADA Training Test
SCADA Training Online Test:
After purchasing SCADA Basics course, complete all 8 test below and copy SCADA (at) bin95.com on test results after completing SCADA Basic Course part of PLC and SCADA Training course. (80% or better average on all 8 test required for certificate) Or just take the test before purchasing course to see if you need to take the course or not.
- SCADA Training Test 1: SCADA basics: (7) *
- SCADA Training Test 2: WinCC training test - Basics: (17)
- SCADA Training Test 3: WinCC training test - SCADA Communication: (16)
- SCADA Training Test 4: WinCC training test - SCADA graphic designer: (6)
- SCADA Training Test 5: WinCC training test - SCADA Project: (10)
- SCADA Training Test 6: Configuring SIMATIC and PLCSIM: (7)
- SCADA Training Test 7: WinCC training test - Editing SCADA: (11)
- SCADA Training Test 8: Network Security: (11)
* (# Of Questions)
PLC and SCADA Course Certificate:
To receive the certificate below you must complete the 8 SCADA training test on this page scoring 80% or better, but first must complete the PLC Basics course. Combine successful completion of both the PLC course at previous mentioned link and the SCADA course result in you receiving the 4.2 CEU PLC and SCADA course Certificate pictured below. You can order these two courses separately, or bundled together as one purchase at PLC/SCADA course certificate and save even more.
PLC and SCADA course certificate REQUIRMENTS:
Email a scanned copy of your PLC Basics Course certificate to SCADA (at) bin95.com, or fax it.
Complete all test on this page with 80% of better while you copy SCADA (at) bin95.com on test results.
Complete the 'Training Task' on slide 70 of SCADA Basic Course
To fully understand SCADA, you need to know PLCs (Programmable Logic Controllers) 1st.
Related Titles:
"PLC and SCADA Certificate Course" "Siemens PLC Trainer - S7-200" "PLC Training Software Course and Simulator CD" "Contrologix - RSLogix 5000 Simulation PLC Trainer" "RSView32 HMI Training Software" |
