Industrial Refrigeration Training

Commercial & Industrial Refrigeration Training Course

In this course, learn the refrigeration and air conditioning cycles. Gain a more in-depth understanding of the basics of air conditioning. Those who repair commercial and industrial refrigeration will value this course. It provides a deeper understanding of industrial refrigeration. This course's knowledge helps techs maintain and repair refrigerators and ACs.

Tap the above for a demo video of the commercial & industrial refrigeration course.

Industrial Refrigeration Training Contents

Industrial Refrigeration Training Certificate Course

ESBN: DR32-134ab-6040-r22

Description: (40hrs)

Industrial-Commercial Refrigeration Engineering Courses

Air Conditioning Basics Course Contents

• 1 REFRIGERATION BASICS
  • 1.1 INTRODUCTION
  • 1.2 STATES OF MATTER / TEMPERATURE / HEAT
    • 1.2.1 Kinetic Energy / Potential Energy
    • 1.2.2 Sensible Heat / Latent Heat / Sub Cooling / Super Heating
    • 1.2.3 Changes of State of Matter
    • 1.2.4 Temperature Scales
    • 1.2.5 Heat Units
    • 1.2.6 Enthalpy / Entropy
    • 1.2.7 Methods of Heat Transfer
  • 1.3 PRESSURE
    • 1.3.1 Atmospheric Pressure / Gauge Pressure / Vacuum
    • 1.3.2 Boiling Point / Vapor Pressure
  • 1.4 REFRIGERANTS / TABLES / DIAGRAMS / UNITS
    • 1.4.1 Refrigerant Types
    • 1.4.2 Refrigerants Tables
    • 1.4.3 Mollier Chart / Pressure - Enthalpy / Temperature - Entropy Diagrams
    • 1.4.4 COP (Coefficient of Performance)
    • 1.4.5 HRF (Heat Rejection Factor)
    • 1.4.6 NRE (Net Refrigeration Effect)
    • 1.4.7 Refrigeration Ton unit / EER (Energy Efficiency Ratio)
    • 1.4.8 Comparison of Diagrams
  • 1.5 AIR CONDITIONING WORKING PRINCIPLE / PSYCHROMETRIC CHARTS
    • 1.5.1 Dry Air and Water Vapor (Moisture)
    • 1.5.2 Relative Humidity
    • 1.5.3 Concept of Drier Air
    • 1.5.4 Dew Point Temperature
    • 1.5.5 Dry Bulb Temperature
    • 1.5.6 Wet Bulb Temperature
    • 1.5.7 Psychrometric Charts
    • 1.5.8 Sensible Heating
    • 1.5.9 Sensible Cooling
    • 1.5.10 Humidification
    • 1.5.11 Dehumidification
    • 1.5.12 Psychrometric Chart - Combination of Heating / Cooling / Humidification / Dehumidification
• 2 AIR CONDITIONING CYCLE / REFRIGERATION CYCLE
  • 2.1 WORKING PRINCIPLE
  • 2.2 VAPOR COMPRESSION CYCLE / SYSTEM
    • 2.2.1 Refrigerant Flow
    • 2.2.2 Low and High Pressure Zones
    • 2.2.3 Correlation with an assumed System with related Temperature and Pressure Parameters
    • 2.2.4 Correlation with NRE (Net Refrigeration Effect)
    • 2.2.5 Correlation with Mollier Diagrams and Refrigeration Charts
    • 2.2.6 Refrigerant Cycle in a representative Industrial Unit
  • 2.3 VAPOR ABSORPTION CYCLE / SYSTEM
    • 2.3.1 Basic System
    • 2.3.2 Ammonia Water Absorption System
    • 2.3.3 Lithium Bromide Absorption System
    • 2.3.4 Triple Vapor Absorption System
• 3 REFRIGERATION - AC COMPONENTS
  • 3.1 THROTTLING / METERING DEVICES
    • 3.1.1 Choke / Capillary Tubes
    • 3.1.2 Hand Expansion Valves
    • 3.1.3 Automatic Expansion Valves
    • 3.1.4 Thermostatic Expansion Valves
    • 3.1.5 Low Side Pressure Float
    • 3.1.6 High Side Pressure Float
  • 3.2 EVAPORATORS
    • 3.2.1 Dry Expansion
    • 3.2.2 Flooded
    • 3.2.3 Bare tube type
    • 3.2.4 Finned type
    • 3.2.5 Natural Convection
    • 3.2.6 Forced Convection
    • 3.2.7 Indirect Refrigeration (Secondary Refrigeration)
    • 3.2.8 Dry Expansion Chillers
    • 3.2.9 Flooded Chillers
    • 3.2.10 AC Frosting / Defrosting
      • 3.2.10.1 Off-Cycle Defrost
      • 3.2.10.2 Electrical Defrost
      • 3.2.10.3 Hot gas Defrost
      • 3.2.10.4 Reverse Cycle Defrost
    • 3.2.11 Evaporator Capacity
  • 3.3 CONDENSERS and COOLING TOWERS
    • 3.3.1 Air-cooled
      • 3.3.1.1 Natural Convection
      • 3.3.1.2 Forced Convection
    • 3.3.2 Water-cooled
      • 3.3.2.1 Double Pipe (tube-in-tube)
      • 3.3.2.2 Shell and Tube
      • 3.3.2.3 Shell and Coil
    • 3.3.3 Evaporative condensers
    • 3.3.4 Cooling Towers
      • 3.3.4.1 Natural Draft
      • 3.3.4.2 Forced Draft
      • 3.3.4.3 Induced Draft
    • 3.3.5 Condenser Capacity
    • 3.3.6 Cooling Tower Capacity
    • 3.3.7 Refrigeration Capacity
  • 3.4 AC COMPRESSORS
    • 3.4.1 Reciprocating (piston) Compressors
      • 3.4.1.1 Open
      • 3.4.1.2 Semi-Hermetic
      • 3.4.1.3 Hermetic
    • 3.4.2 Rotary Compressors
      • 3.4.2.1 Scroll
      • 3.4.2.2 Rolling Piston
      • 3.4.2.3 Sliding Vane
      • 3.4.2.4 Screw
    • 3.4.3 Centrifugal Compressors
  • 3.5 MISCELLANEOUS
    • 3.5.1 Fans
      • 3.5.1.1 Centrifugal (Blowers)
      • 3.5.1.2 Axial Fans (Propellers)
    • 3.5.2 Piping Layout
    • 3.5.3 Insulation
    • 4. HVAC Skill Tests with evaluation

Categories: HVAC | refrigeration | refrigeration cycle | HVAC contractors | air conditioning contractor | air conditioning cycle | types of compressor | refrigeration course | compressor types | air conditioning basics | refrigeration training | refrigeration basics | air conditioning course | AC repair | Ron Walker HVAC

PLACE ORDER

Related Products:

Electrical Troubleshooting Training Simulation Software

Infrared Inspection of Mechanical Systems

Gas and Air Compressor Training Course

Hydraulics Training Certificate Course

Industrial Hydraulic Systems and Circuits Course

Hazardous Area Instrumentation Training

Please click Contact BIN95 to submit your questions and comments.